Flowserve - GF-200

Flowserve – GF-200

Manufacturer

Flowserve

Flowserve GF-200 dual seals are non-contacting, gas barrier seals used in applications where no emissions of hazardous pumped products can be tolerated. Advanced Pattern Groove System provides low speed lift-off, low gas leakage and no face contact.

ADDITIONAL INFORMATION

  • Up to 35.4 bar (500 psi)

  • -40 to 260°C (-40°F 500°F)

  • up to 25 m/s (83.3 fps)

  • 25.4 to 152 mm (1.000 to 6.000 inch)

  • Dual seal pressurized with an inert gas barrier operates with zero process emissions to satisfy environmental monitoring requirements

  • Silicon carbide seal faces use APGS Precision Face Topography to separate the faces with a stiff, thin gas film that prevents wear and extends seal life

  • The LoDragTM O-ring technology provides consistent dynamic O-ring squeeze to reduce drag and maintain proper seal face tracking

  • Seal faces are optimized by geometry, materials, spring loads, and drive mechanisms to remain flat under all operating conditions and deliver long-term, reliable performance

  • Non-contacting seal faces require very low power consumption during start-up and running operation

  • GENERAL INDUSTRIES: Pulp & Paper | Mining | Steel & Primary Metals | Food & Beverage | Corn Wet Milling & Ethanol | Other Industries

  • CHEMICALS: Basic (Organic & Inorganic) | Specialty (Fine & Consumer) | Biofuels | Pharmaceutical | Petrochemicals

  • WATER: Water Management | Waste Water | Agriculture & Irrigation | Flood Control System

  • OIL & GAS: Upstream Exploration & Production | Downstream Processing

  • POWER: Nuclear | Conventional Steam | Geothermal | Combined Cycle | Concentrated Solar Power (CSP) | Biomass & MSW